Rubber Tree Plant Turning Black

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about why a rubber tree plant might be starting to turn black. It’s often caused by the soil that is growing being severely overwatered. This can actually be seen across most plants in terms of the way it’s growing. If it’s turning black there is too much water present.

Keeping it moderate really is the key when growing a rubber tree. The soil should never really be anything more than damp. That just otherwise seems to have a diminishing effect on the health of the plant.

Below is the next segment, we will dive deeper into what it means to care for and grow a rubber tree at home. It’s not the most common variety out there. It is however a great option for beginners since it’s fairly easy to start cultivating.

Rubber Plant In A Pot

Rubber Tree Plant Turning Black

If you read the first segment here in the article then we mentioned that the rubber tree really won’t do very well in a condition where there is a large amount of water in the soil. It will cause a lot of issues for the roots of the plant. 

Instead, we should try to keep the soil slightly damp instead. That has proven to be the best possible way that the plant can grow. It won’t cause stress as oxygen is still able to pass through the soil.

Something that happens when there are large amounts of water in the soil is that oxygen can pass through. That then makes for a very hostile environment for the roots.

As the roots aren’t able to get the necessary amount of oxygen they will begin to start decompose after they have drowned. Sounds very dramatic but that is what is going on below the surface. 

When the roots are dying there aren’t any nutrients able to pass on to the rest of the plant anymore. That causes the parts above to turn black as they are also decomposing.

If your rubber plant is turning yellow then you might want to read this article right here, Rubber Tree Plant Turning Yellow.

Large Rubber Plant In A Window

Why Is My Rubber Plant Turning Black

As we said before here, a plant turning black is often caused by it not getting any oxygen from the soil. The reason for there not being any oxygen in the soil is that there is water blocking it out.

It really doesn’t take long until you start seeing the effect of this on the rest of the plant as it begins to turn black and decompose. The same goes for the rubber plant. It might be a pretty resilient plant in general but something like a lack of oxygen will still have a pretty severe effect on the plant.

If you are curious about using rubber plants for bonsai then you might want to read this article right here, Rubber Plant Bonsai.

Rubber Plant In A Pot

How Do You Revive A Dying Rubber Plant

A dying rubber plant is often one that has been overwatered. The roots have died because they couldn’t get any oxygen and the rest of the plant is now decomposing. The only thing you could do is move the plant to a sunnier place.

That will hopefully start to dry out the soil slightly. If you are lucky you can dry out the soil and perhaps save some of the roots before all of them are gone. With time and care you might have your rubber plant saved.

Green Rubber Plant In The Sunlight

Rubber Plant Bonsai

Home » Houseplants » Rubber Plant

Welcome to this article which will be talking about the possibility of using rubber plants for bonsai. It’s very much possible doing this and it might be one of the better ones even to use. Rubber plants are generally speaking pretty resilient and easy to grow in most places.

The plant will need a good warm environment where it can get about 8 – 10 hours of sunlight each day and have soil rich in nutrients. Making sure you have these things covered will make it easier to ensure you have a beautiful plant. It’s easier trimming and cutting a healthy plant than one that’s not.

Below we will continue the topic of growing and caring for your new rubber plant bonsai. A great option for beginners starting either in the gardening space or in the bonsai space exclusively perhaps.

Rubber Plant In A Kitchen

Rubber Plant Bonsai

As we mentioned at the beginning of this article here, the rubber plant will be an excellent choice for those that wish to use it for bonsai. It grows relatively easily in most environments and doesn’t come with a lot of requirements

It simply needs a place where it can get enough sunlight each day and soil where it always has enough nutrients. It shouldn’t dry out either that much. We mention these things because cutting and trimming a plant for bonsai will be a lot easier if the plant is healthy from the start. 

It will take some patience before you are able to start cutting and shaping your bonsai plant. At years 3 – 4, you might be able to do the first. Before then the only thing we might do is shape it with metal rods. The ones used to bend the main stem of the plant to what we want.

What also should be mentioned is that the plant can’t really take too much cutting at the same time. Instead, you might want to plant out your trimming and cutting a little bit more. If the plant is too stressed it will just take longer until the next time you are able to do some trimming.

Some of the signs that a rubber plant isn’t feeling very well are leaves starting to wilt or changing color rather drastically. Those are things we definitely need to look out for as they can be very serious. 

If your rubber tree is starting to turn black then you might want to read this article right here, Rubber Tree Plant Turning Black.

Large Rubber Plant Indoors

Can Rubber Plant Be Bonsai

As we already revealed in the article here, the rubber plant is actually a great option to have as a bonsai. The plant is rather resilient to a lot of common diseases and the roots can grow very strong and stable, providing longevity for the plant.

But there are some things that should be mentioned. It’s hard to have a really bushy appearance or several off-growths from the main stem of the plant. The style and look of the rubber plant will be very specific.

But working with this different type is what we feel is the whole point. It looks good and provides an interesting way of growing and caring for houseplants.

If you are seeing air roots on your rubber plant then this article might be interesting if you want to learn more, Rubber Plant Air Roots.

Green Rubber Plant

Does A Rubber Plant Need Sun Or Shade

A rubber plant will need more sun than shade. We often recommend about 8 – 10 hours of sunlight at least each day for the rubber plant. That way we can be sure it’s not getting too little or too much. 

If the plant is getting too little the structure and health of the plant will start to diminish. It needs the energy the sunlight provides in order to continue to grow and establish itself in the space it’s in.

Green Rubber Plant Indoors

Rubber Plant Air Roots

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about why you might be seeing air roots on your rubber plant. It’s not very common for this to happen in all honesty. Air roots are something that can happen to a lot of plants, especially houseplants which the rubber plant is a part of.

It’s often caused by a small lack of nutrients in the soil. It causes the roots to sort of grow in an unordinary way. The roots are seeking nutrition and one of the ways to get that would be by going above the surface appearance.

Follow along in the article and we will be discussing some of the ways to care for and grow a rubber plant at home. It’s a great option for beginners that are looking at getting into gardening at home. It hasn’t really gotten traction just yet in space, even though it’s very easy to start cultivating.

Rubber Plant Leaves In The Garden

Rubber Plant Air Roots

As we said at the beginning of the article, the rubber plant is able to have air roots starting to grow. It’s not really something that you should be worrying about too much. It happens because of a small issue with the soil.

The roots might not be finding all the necessary nutrients they want. That makes them start to grow above the soil instead. In order to try and find some form of nutrient it might be lacking.

It should be said that a completely healthy rubber plant is able to grow in this way and you shouldn’t really worry at all. We strongly recommend you not to try cut or force down any roots that might be appearing above the soil. It will most likely just cause issues down the line with the plant instead.

What you could do however is try and use some fertilizer for the soil. That will hopefully help the plant in its quest to find nutrients. As the plant is growing in the same soil all the time, there won’t be an influx of nutrients to it. Instead we need to provide that manually to the soil ourselves.

Try to use organic fertilizers. That can be found in more or less all gardening stores with a good selection. It will say on the bottle how often it can be used and how it should be diluted. But we strive for only adding it about every 2 months or so to keep some form of moderation.

If you want to use rubber plants for bonsai then you might want to read this article here, Rubber Plant Bonsai.

Green Rubber Plant In The Kitchen

Do Rubber Plants Have Roots

Rubber plants definitely have roots. They aren’t really that large and will spread sort of like a nest. That’s the fastest and easiest way for the plant to quickly establish itself. 

The size of some of the roots will differ of course. The one going deeper might be slightly larger. It’s important that we don’t overwater the soil as that will cause the roots to start to drown. There is oxygen traveling through the soil, perhaps not in large amounts, but some at least. 

That oxygen is necessary for the roots to be able to continue to grow and make the rest of the plant flourish. A soil which is kept slightly damp all the time seems to be ideal.

If you are seeing white dots on your rubber plant then you might want to read this article right here, Rubber Plant White Dots.

Rubber Plant Growing Inside

Do Rubber Plants Like To Be Root Bound

Rubber plants do prefer to be root bound. They will grow the best in a place where they can harness the soil and provide a healthy place for the roots to grow in. They want soil rich in nutrients.

Never let the soil dry out too much, keep it slightly damp all the time. That will provide the best possible environment to grow the plant.

Green Rubber Plant Growing Indoors

Rubber Plant White Dots

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about what those white dots are on your rubber plant. It’s really not a very serious issue at all. It’s most likely a natural component found in rubber plants that is reacting to something and causing white dots.

It’s only if we see the plant starting to wilt and wrinkled that we should start worrying. That’s when it might instead be mold or something serious. The natural component is called lithocyst. Something found in all different varieties of rubber plants out there.

Follow along below in the article here and we will continue to learn about the wonderful houseplant that is the rubber plant. It hasn’t gotten the attention just quite yet, a shame since it’s a great-looking decorative house plant and very easy to care for.

Small Rubber Plant Indoors

Rubber Plant White Dots

As we said at the beginning of the article here already, the rubber plant has something which is called lithocysts in it. That’s something that can be found in basically all varieties of this plant.

It’s unknown what makes it trigger to produce calcium carbonate. That’s the compound that appears as the white spots or dots. Completely harmless really. It might be that the trigger is something like a lack of water or lack of sunlight. If that’s something that might be possible then have a look and see if they could be fixed.

It should however be mentioned as well that there is a possibility that the plant instead is under attack by a mold. This isn’t completely out of order. Powdery mildew is one of the most common types of mold which can grow on more or less all plants.

The look of the leaf however will be pretty different instead. The plant will begin to smell as well as wilting and looking poorly. If that starts to happen then it’s a big chance there is mold growing on it. In that case, it’s recommended to simply remove the leaves affected. With some luck that will help mitigate the future spread of the mold on the rest of the plant.

If you are seeing aerial roots on your rubber plant then you might want to read this article right here, Rubber Plant Air Roots.

Green Rubber Plant Leaves

How Do You Get Rid Of Fungus On Rubber Plants

Getting rid of fungus growing on your rubber plant is not that difficult really. It’s most likely something called powdery mildew. A quite common type of mold found on more or less all plants. It can be easily gotten rid of.

The result will be small white spots or dots appearing on parts of the plant. Hopefully, you are able to see them really quickly and therefore can act really quickly too. The best idea is to simply take the leaves which have been affected and cut them off. That will help keep the mold from spreading to other parts of the plant.

If your rubber plant is starting to bend over then this article here might be great for you, Rubber Plant Bending Over. It’s a pretty common issue that can easily be fixed.

Green Rubber Plant In A Pot

Red Spots On Rubber Plant

Red spots on your rubber plant can be from it being exposed to too much sunlight for a prolonged period. It causes the leaves to blister or be sunburnt. That means the leaves aren’t able to perform photosynthesis anymore from those areas of the plant.

It’s often recommended to simply remove those leaves and let new ones grow forth instead. That will help the plant immensely most likely. As the dying leaves cause stress. It’s sort of like ripping the bandaid off straight away to hopefully have a quicker recovery.

Green Rubber Plant Growing In A Pot

Rubber Plant Bending Over

flower, houseplant, green-4850729.jpg
Home » Houseplants » Rubber Plant

Welcome to this article that will be discussing why a rubber plant might be starting to bend a lot. This is a pretty common issue among people who are new to growing and caring for the plant. There are a few issues that will start to happen.

The most common is an imbalance in watering. If the plant is kept in a spot where it’s not getting enough water or getting too much water. That causes the plant not to grow very steadily. It makes for weak roots and in general a weak structure. Which then causes the plant to start bending over.

Follow along in the article below and we will continue learning about the wonderful plant that is that rubber plant. It’s one of the less common houseplants out there, at least compared to cactus or monstera plants. Nonetheless, it’s a great option for the beginner for its low maintenance level.

Green Rubber Plant In A Window

Rubber Plant Bending Over

If you read the first segment in the article here, you would know that the rubber plant is often starting to bend because of an imbalance of watering. If the plant constantly gets too much or too little it causes stress to the plant. 

This will make the structure of the plant weaker and weaker. After a while, you will begin to see the entire plant starting to bend over. With all that said you might wonder what the plant wants to grow in then.

We have found that the best possible soil for the rubber plant is a well draining one. That means the excess water can drain away and you won’t risk drowning any of the roots. The ideal texture of the soil will be one that’s slightly damp.

A damp soil provides all the nutrients the roots might possibly need while also making sure enough oxygen can get through and help the roots. No oxygen and the roots will instead start drowning rather quickly.

We should also talk a little bit about the sunlight the plant is getting. Something we see across the board of growing plants is that those which aren’t getting enough sunlight will also start bending. The plant wants a certain amount each day and will start growing towards the light if it doesn’t get enough.

If you are seeing white dots on your rubber plant then you might want to read this article here, Rubber Plant White Dots.

Small Rubber In A Pot

How Do You Fix A Leaning Rubber Plant

Fixing a leaning rubber plant is done by making sure you have the basic needs of the plant covered. As we already said here, that means the plant needs about 8 – 10 hours of sunlight each day in order to protect it from bending or even wilting

Another thing we need to look at is the amount of water in the soil. We shouldn’t have too little as that will cause the roots to start stressing quite quickly. The ideal texture of the soil is as we said previously slightly damp. 

Using some fertilizers as well will do good. That will provide a boost of nutrition for the plant. It might help with the strength of the rubber plant a little bit.

If you are seeing white spots on your rubber plant then you might want to read this article here, Tiny White Spots On Rubber Plant.

Rubber Plant Leaves Outside

Why Is My Rubber Tree Bending

Improper watering of a plant or a tree will cause it to not grow straight anymore. It makes for an imbalance. This imbalance is what makes the plant start growing weirdly. It stresses the plant and causes the structure of the plant to be weaker.

A weaker structure makes it harder to keep up its weight of itself. After a while, you will begin to notice the plant leaning more and more basically.

Green Rubber Plant Indoors

Rubber Tree Leaves Turning Brown And Falling Off

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about rubber trees starting to lose leaves. It’s something that can happen to a lot of beginner gardeners out there. The plant is currently being overwatered quite a lot.

The plant won’t be able to make use of all that water that is present in the soil right now. As there is too much water, the roots begin to rot and the rest of the plant will start doing the same. That’s when you start to see the leaves turning brown and falling off.

Below here we will share even more information about the topic of growing and caring for a rubber tree. It’s one of the less common houseplants out there, but nonetheless a great option for beginners. It’s generally referred to as a pretty hardy and resilient plant against disease.

Green Rubber Plant In A Pot

Rubber Tree Leaves Turning Brown And Falling Off

As we said before here, the rubber tree is currently being overwatered quite a lot when the leaves are turning brown and falling off. There is an ideal environment for the rubber tree to grow in.

The roots will grow the best in soil that is just slightly damp. That will emulate the wild environment the plant grows in otherwise the best. The roots won’t have a surplus of water which would block out oxygen from the soil.

If the roots aren’t able to have oxygen while they are growing then you will run into risks like the plant starting to turn brown. The first thing that happens is that the leaves will turn brown after being severely overwatered. After that, the leaves will begin to fall off one by one.

Luckily it’s pretty easy to prevent this and also hopefully save the plant once it has started happening. Just watering in small amounts and letting it settle in the soil is the best practice if you are a beginner with rubber trees.

If it’s already too much water in the soil you could try and put the plant in a sunnier area and perhaps even outside. That will hopefully have the soil drying out a little bit quicker and perhaps you will be able to save your rubber tree before anything worse comes.

If the leaves are curling on your rubber plant then we highly recommend this article here for you, Rubber Plant Leaves Curling.

Rubber Plant In The Window

How Do You Fix Brown Leaves On Rubber Plants

Fixing brown leaves on rubber plants isn’t really the easiest. Once it has happened then it’s hard to get it back to a green color again. If the color is instead yellow then it’s a lot easier to turn it back into a green color.

The plant will have gotten pretty overwatered when the color is turning brown. That means some of the roots have started rotting because they can’t get any oxygen

Placing the plant in a sunnier area to dry out some liquid from the soil will hopefully help a little bit. But also using some fertilizer might help boost the recovery a little bit quicker.

If your rubber tree is starting to turn yellow then we highly recommend reading this article to hopefully find the solution for you, Rubber Tree Plant Turning Yellow.

Rubber Plant Growing Inside

Why Are My Rubber Tree Leaves Falling Off

The leaves on your rubber tree will begin to fall off as the plant is getting way too much water. The roots are starting to rot and that will affect the rest of the plant. The roots are what make sure the rest of the plant gets nutrients.

Without nutrients, that plant won’t be able to grow and instead will turn back into the soil. Which shows up as the plant turning brown and the leaves falling off.

Rubber Plant Leaves Indoors

Rubber Tree Plant Turning Yellow

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about rubber trees turning yellow. This is a quite common occurrence among a lot of beginner gardeners. The rubber tree is in general a pretty hardy plant and resilient to a lot of diseases.

But the plant is susceptible to certain things like too much sunlight and soil which does not contain any nutrients. Both those two things are causes for a rubber tree starting to turn yellow. 

Below is the article here, we will continue the topic of growing and caring for rubber trees. It’s one of the less common houseplants out there, but nonetheless a great choice for beginners. As we said, it’s pretty resilient to disease and can manage rough times very well.

Rubber Plant In A Window

Rubber Tree Plant Turning Yellow

Just like we mentioned at the start of the article here, the rubber tree is able to turn yellow when it’s exposed to some harmful environments. That could be for example being placed in a too-sunny spot in your apartment or house.

Too much sunlight and the plant will get very tired. We always recommend trying to get just around 8 – 10 hours of sunlight each day if you keep it indoors. That seems to be the ideal time for the plant to perform enough photosynthesis each day. 

The plant will get too much of the good stuff basically when exposed to more sunlight than what we mentioned was ideal. The leaves will begin to wrinkle on the sides and after a while, the color will shift more toward yellow instead.

The second reason we mentioned was the soil which does not contain any nutrients. As there isn’t anything for the plant to take from the soil, it will begin to start stressing a lot which causes the plant to shift in color. 

The soil should be fertilized about every month or two. That way we’ll have an influx of healthy nutrients in the soil. The roots will have a much easier time than getting nutrition to the rest of the plant. That then turns into the plant being able to continue growing and having a healthy structure too.

If the leaves are falling off your rubber tree then you should read this article right here, Rubber Tree Leaves Turning Brown And Falling Off.

Rubber Plant In A Pot

Will Yellow Leaves On Rubber Plant Turn Green Again

The leaves on your rubber plant will turn green again if they have turned yellow before. The thing we need to make sure of is that the plant is living in a great environment where it can live healthy and without stress.

Stress is more or less what makes the plant start to turn yellow in color. So in order for us to make the planet once again turn back to green we need to emulate this ideal environment. For us, that means finding a spot where the plant can get about 8 – 10 hours of sunlight each day and no more or no less.

Second is fertilizing the soil every now and again to make sure the roots get the nutrition they need. Watering the soil as well is important. Try to keep the soil slightly damp all the time.

If your rubber tree is turning black then you should read this article, Rubber Tree Turning Black.

Green Rubber Plant In A Window

What Does An Overwatered Rubber Plant Look Like

An overwatered rubber plant will begin to turn black. The plant is getting way too much water and the roots are drowning because of it. If they have drowned then they will begin to start rotting.

As the roots have rotted the rest of the plant won’t get any nutrition, meaning the entire plant will begin to turn back into the soil. That shows up as parts of the plant turning black.

Rubber Plant Indoors

Tiny White Spots On Rubber Plant Leaves

Home » Houseplants » Rubber Plant

Welcome to this article that will be talking about why you might be seeing small white spots on your rubber plant. We should probably say this directly. These white spots on your rubber plant are really nothing to worry about. It’s perfectly normal.

The rubber plant leaves contain something called lithocyst. These are enlarged cells that contain another very scientific term called calcium carbonate crystals. These are what will cause the leaves to have small white dots.

Follow along in the article and we will continue to talk and learn about the fantastic houseplant that is the rubber plant. It’s one of the more beautiful house plants we have, but nonetheless not very common actually. It’s a great option for beginners because of the low maintenance and resilience to diseases.

Rubber Plant In A Pot

Tiny White Spots On Rubber Plant Leaves

As we said at the beginning of the article here, the white spots that might appear are not something to worry about. It’s simply something that will be happening because of a component in the leaves called lithocyst.

This can be found in basically all varieties and variegated versions of rubber plants. The trigger as to why it might start producing these white spots is not known though. 

The only reason why you might want to start worrying is if the plant is starting to wilt or wrinkle while this is happening. Then there is something else that’s wrong with the plant. 

White spots could be mold too. Something called powdery mildew is a mold that can be found on basically all plants. It’s something that can seriously become an issue if left unchecked. The leaves affected will start smelling and look a lot sadder. 

The best thing when you see that is to simply cut off the leaf and let there be a new leaf grows forth. Cutting the leaves affected will help mitigate and contain the mold growth forms spreading rapidly.

If you have a rubber plant that is starting to bend then this article might be for you, Rubber Plant Bending Over.

Small Rubber Plant In The Kitchen

How Do You Treat White Spots On Rubber Plants

Treating white spots on a rubber plant is not necessary unless it’s molded. Try and have a look at the condition of the leaf itself. If it’s starting to wilt around the area then most likely you are dealing with some form of mold forming on it. 

Most likely it will be powdery mildew. A quite common type of moldable to grow on more or less all plants. The best thing to do now is to cut the leaf off completely. It will hopefully mitigate the mold and cause it not to spread any further to the rest of the plant.

If it’s what we discussed at the beginning of the article. A natural compound found in rubber plants called lithocysts then you have nothing to worry about. Trying to treat it might just make it worse.

If your rubber plant stopped growing then you might want to read this article right here, Rubber Plant Stopped Growing.

Large Rubber Plant Indoors

Why Does My Rubber Plant Have Spots On The Leaves

A rubber plant will start developing small spots on the leaves because of something called lithocysts. This is actually something that can be found in more or less all rubber plants, be they variegated or not too.

You don’t have to worry about that. It’s perfectly natural for the plant to start developing those small spots. It’s a common occurrence but it’s still unknown what causes it to be triggered.

Green Rubber Plant Outdoors

Rubber Plant Stopped Growing

Home » Houseplants » Rubber Plant

Welcome to this article that will be discussing why a rubber plant is not growing anymore. The plant will need a great place to grow in order to promote growth. The most common issue for the plant not growing anymore is because of a lack of sunlight.

It can be directly connected to this in terms of looking at the growth of the plant. The plant will though be able to get a surplus of sunlight which makes the leaves sunburnt and have a hard time performing.

Follow along in the article here and we will continue to talk about the rubber plant. It’s one of the less common houseplants we have but a great option for those that are new to gardening. It’s pretty low maintenance and resilient to a lot of diseases.

Rubber Plant Growing Indoors

Rubber Plant Stopped Growing

As we said at the beginning of the article already. There is a direct connection between the amount of sunlight the plant is getting and the growth of the plant. The rubber plant is very much able to get too much sunlight each day. 

If it gets too much then the rubber plant won’t be growing so well. The leaves will instead be drying out and causing issues. You might wonder then what the ideal amount of sunlight the plant should be getting is. We recommend 8 – 10 hours if you grow it indoors.

Outdoors however the plant will need slightly less, about 6 – 8 hours. Growing it outdoors on freeland you definitely need to be aware of the place you grow it in. If it’s constantly getting too much then the plant will just be growing poorly.

Like with fertilizing the soil, it’s recommended to do it in moderation to prevent any harm being caused to the plant. We said that the growth of the plant is in correlation with the amount of sunlight the plant is getting. Too little sunlight will also cause the plant to have poor growth. 

The lack of sunlight makes the leaves unable to perform photosynthesis which is the process by which the leaves are generating energy for the rest of the plant from the sunlight it’s exposed to.

If you are seeing white spots on your rubber plant then you might want to check out this article right here, Tiny White Spots On Rubber Plant Leaves.

Rubber Plant In A Pot

Why Did My Rubber Plant Stop Growing

The reason your rubber plant probably stopped growing is because of a lack or excess of sunlight. The plant needs to have a balance of this in order for it to properly grow and flourish

Most rubber plants will be grown indoors. We recommend trying to keep the plant in a south-facing window where the most sunlight will be found. Try and keep it there for about 8 – 10 hours each day. That way the plant will get a balanced and healthy amount each day. 

If you are still seeing the plant not growing then you might want to try and fertilize the soil a little bit. Use some organic orchid fertilizers that can basically be found in all well-assorted gardening stores.

If the leaves are cracking on your rubber plant then this article is definitely for you, Rubber Plant Leaves Cracking.

Green Rubber Plant In The Sun

Do Rubber Plants Go Dormant

Even though you are keeping the rubber plant indoors it will go dormant. The plant won’t be growing as quickly as during the summer. Even though the plant basically experiences the same amount of sunlight and temperature all year around.

It’s a seasonal variation and like most plants, the growth will be seen during the summer season. When spring comes around you might even want to use some fertilizers for the soil to help boost the growth of the first weeks. That way you will have a very successful year in terms of growth.

Rubber Plant In A Pot

Rubber Plant Leaves Cracking

Home » Houseplants » Rubber Plant

Welcome to this article where we will be talking about why the leaves on your rubber plant might be cracking. The plant is one of the more resilient houseplants we have, but can still face some issues with the way it’s growing.

The leaves cracking is often caused by the plant being both overwatered and overfed in terms of fertilizers. These are things that are pretty easy to fix but will need some knowledge in preventing them from even happening.

Follow along in the article below and we will share more info about growing and caring for a rubber plant. It’s one of the best plants for beginners looking to get into gardening. It’s resilient and a great decorative house plant too.

Rubber Plant In A Pot

Rubber Plant Leaves Cracking

As we said already in the article here, the rubber plant will start having its leaves cracking because it’s experiencing a lot of overwatering and overfeeding. Those are pretty easy things to prevent, however.

The ideal condition for the plant to grow in is a south-facing window where it will get about 8 – 10 hours of sun each day. That way the plant is able to perform photosynthesis and generate energy for the entire plant.

As for the soil, the texture should never be wetter than damp. That is the ideal spot for the roots to be growing in. They will be able to get the necessary amount of nutrition while also not risking any of the roots drowning from getting no oxygen.

Too much water is what’s keeping oxygen out of your soil. A lack of oxygen causes the roots to rot and makes them start wilting. No roots mean no energy or nutrition for the rest of the plant.

You can also try and keep the fertilization of the soil down too. That will greatly help your roots not be used to a surplus of nutrition all the time. The plant can really get too much of the good stuff.

Fertilizing the soil about every 2 months or so will be plenty enough for the plant. The soil will not be introduced to new nutrition naturally so we have to find a natural balance adding it ourselves.

If your rubber plant stopped growing then you might want to read this article here that we have put together, Rubber Plant Stopped Growing.

Large Rubber Plant Indoors

Should I Cut Off Damaged Rubber Plant Leaves

The leaves on your rubber plant which have been damaged are most likely not able to grow back to the same look they had before. The leaves are very likely to be damaged by things like too much sunlight or too much fertilizer in the soil.

The damaged leaves are like we said not likely to grow back to the same beautiful look, so cutting off the leaves at the bottom of the plant is a great idea. That way the plant will have new space for leaves to grow from. You might get a bushier look to it and hopefully a new healthy leaf eventually.

If your rubber plant is starting to look wrinkled then you might want to learn about the solutions to it in this article here, Rubber Plant Leaves Wrinkled.

Rubber Plant In A Pot

How Do You Fix A Broken Rubber Plant Leaf

A broken rubber plant leaf is unfortunately not able to be fixed. If it snapped off in half then the leaf will form a crust almost along the exposed area where it broke. It will stop growing from here and instead the leaf will either stay as it is or start to turn brown instead.

The best way to prevent damaged leaves is to keep the plant indoors in a south-facing window where the leaves are able to get enough sunlight. This will provide enough sunlight each day which makes the plant not dry out or look wrinkled.

Green Rubber Plant In A Window